Grass Valley T2 Classic iDDR Addendum - Manual (Page 22)

22 Users Manual (Addendum for SP3) November 30, 2010
Chapter 2 T2 XDCAM Option
CAUTION: If you want to use Chinese for file names, you must set the character set
of file names to UTF-8 on the FTP client side beforehand. Correct file names cannot
be displayed if the character sets do not match. The configuration method depends
on your software. Refer to the help etc. of your software.
1. Click Config... .
2. Click Network-1 in the "General" tree.
3. Configure the IP address and DNS server address.
4. Click FTP in the "General" tree.
5. Click Settings... .
• To change the settings, you must first stop FTP and then click Settings... .
6. Configure the FTP server settings, and then click OK .