Grass Valley PDX 208 - Manual (Page 57)

Removing and Replacing a Fan
PDX208 Instruction Manual 3-25
To remove a fan:
1. Remove the PDX208 from the rack.
2. Remove the top cover (Figure 3-8).
3. Remove the Disk Tray cover (Figure 3-9).
4. Disconnect the appropriate fan cable from the left or right side of the SCSI
Distribution board (Figure 3-14).
5. Remove the appropriate fan mounting screws and lift the fan up and out of the
chassis.
To install a fan:
1. Position the fan and mount with the screws previously removed (Figure 3-14)
2. Connect the new fan cable to the left or right side of the SCSI Distribution board.
3. Reinstall the Disk Tray cover (Figure 3-9).
4. Replace the top cover (Figure 3-8).
5. Reinstall the PDX208 into the Equipment rack.