Grass Valley PDX 208 - Manual (Page 19)

Mounting the Slides in the Rack
PDX 208 Instruction Manual 2-3
Locate the proper rack holes as shown in Figure 2-2. Notice that the hole spacing can
vary with the rack type. When mounting the slides in racks with EIA spacing, make
sure that the slides are attached to the 0.5-inch spaced holes.
Figure 2-2. Spacing for Mounting Holes in a Rack
1.250 in
(3.18 cm)
MIL STD 189
SPACING
“UNIVERSAL” SPACING
EIA RS310, RETMA
0.500 in
(1.27 cm)
0.625 in
(1.59 cm)
1.250 in
(3.18 cm)
1.250 in
(3.18 cm)
0.625 in
(1.59 cm)