Grass Valley PDX 208 - Manual (Page 35)

Cleaning and Changing the Air Filter
PDX208 Instruction Manual 3-3
Cleaning and Changing the Air Filter
In a humid environment, the air filter behind the front bezel of the PDX208 will
usually require more frequent attention than in a dryer environment. Figure 3-1 shows
the location of the filter which requires removal of the front bezel. To remove the air
filter for cleaning or replacement, refer to Figure 3-1, and proceed as follows:
Figure 3-1. PRX208 Air Filter Removal
1. Unsnap the front panel bezel by firmly pulling away from the front panel.
2. Detach the air filter from the studs behind the bezel.
3. If cleaning, use a low pressure air supply to blow contaminants out of the filter.
4. Attach the filter to the bezel as shown in Figure 3-1.
5. Position the front panel bezel mounting posts over the holes in the front panel and
snap the bezel back in place.
Air Filter
Air Filter
Unsnap Front
Panel Bezel
Remove
Air Filter
9687-8
1
2