Grass Valley Profile Family 18GB Disk Drive Upgrade - Manual (Page 21)

Reassembling the Profile System
18GB Disk Drive Upgrade 21
Reassembling the Profile System
To reassemble the Profile system:
1. With a non-metallic, flat-bladed tool, pry the screw hole plugs out of the
screw holes on the top-front cover leaving a hole for each new disk you
installed.
2. Use the Torx tool with the T10 and T15 tips to reinstall the front chassis
cover with the screws previously removed and the additional screws
included with the kit.
3. You can reinstall the Profile system in the rack now or after the next
procedure.
Creating the Disk File System
The VdrPanel normally starts automatically when you power up the Profile
system, but you first need to create the disk file system to include the new disk
drives. Perform the following to prevent the VdrPanel from starting and to create
the disk file system.
1. Reconnect the power cord and all previously disconnected cables.
2. Turn on the Profile system and hold the Shift key down during the start up
process until the login window appears.
3. Log in as administrator.
For Username, enter: administrator
For Password, enter: triton
4. Choose Start | Programs | Profile Applications | Profile Disk Utility to open the
Profile Disk Utility. The Profile Disk Utility appears as shown in Figure 3.