Grass Valley NV9606 v.1.1 - Manual (Page 48)

38
Operation
Self-Test
Self-Test
You can perform a short test of the NV9606 when it is disconnected from its network and
powered up.
The panel powers up with the top right button illuminated in green and a moving pattern of
green button illumination on the top row of the panel:
Here we call the button at the top right the “self-test” button. Press the self-test button to
proceed to the color test. This test has 4 parts:
• All buttons turn high-tally amber.
• All buttons turn low-tally amber.
• All buttons turn high-tally red.
• All buttons turn low-tally red.
• All buttons turn high-tally green.
• All buttons turn low-tally green.
To proceed through this test, press the self-test button (still in the same place although it is now
changing color) 5 more times.
Finally, you will reach the button test:
All the buttons turn off. Press any button to test it. If the button is working properly, it will flash a
few times rapidly.
Pressing the self-test button will terminate the button test and return your panel to its initial
state. The moving pattern of green button illumination reappears and the self-test button is
illuminated.
Self-
test
Self-
test