Grass Valley NV9606 v.1.1 - Manual (Page 19)

9
NV9606
User’s Guide
You can now prepare an NV9606 configuration in NV9000-SE Utilities and upload the configura-
tion to the NV9606. You need a panel ID to create a NV9606 configuration. When you upload the
configuration, the panel ID you entered in NV9000-SE Utilities designates the actual panel to
which the upload will occur. If no actual panel has that ID, the upload cannot occur.
Setting the Panel ID
 It is not possible to set the panel ID of an NV9606 at the panel itself. You must use NV9000-SE
Utilities to set the panel ID.
Follow these steps to set the panel ID.
1 If you have more than one NV9606 to set up, choose one of them.
2 Apply power to the panel. Connect one panel to the appropriate panel/router network of
your system controller.
3 In NV9000-SE Utilities, click ‘System Management’ in the navigation pane. Click the “+” sign
next to the icon for the applicable system in the ‘System management’ tree at the left. Doing
that expands the information “tree” associated with the system. Then click the
‘Control Panels ...’ entry in the tree.
The control panels page appears:
4 Observe the ‘Panel Network Errors’ list in that window. You should see a network error mes-
sage for the NV9606 you have connected.
This example shows a panel ID of 0. Usually, NV9606 panels from the factory have an ID of 0.
Panel Error
Message