Grass Valley NV9606 v.1.1 - Manual (Page 28)

18
Configuration
Button Definitions
Button Definitions
When the NV9606 operates stand-alone, it has only a few button functions:
Source Previous Source Salvo
Destination Panel Lock
When it is an NV9607 extension, there are three classes of button functions:
• Dedicated functions, such as ‘Default State’ or ‘Chop’.
• Variable functions, such as ‘Source’ or ‘Destination’.
• Special functions, such as ‘Menu’ and ‘Salvo’.
When the panel is an NV9607 extension, the buttons operate as they do for an NV9607. For
example, source buttons on the NV9606 are subject to the source shift function and source
names selected on the NV9606 are displayed on the NV9607 (where names of a name set might
be displayed).
Status Monitor None The current source video is not sent to a monitor.
‹device› The current source video for the selected destination appears on
the specified monitor (device).
High-Tally Illumi-
nation (The default is
100.) Sets the panel’s button illumination for high-tally. Use the arrow
buttons to scroll to a value. The values range from 10 to 100 in
increments of 10 (percent).
Low-Tally Illumi-
nation (The default is
60.) Sets the panel’s button illumination for low-tally. Use the arrow
buttons to scroll to a value. The values range from 0 to 90 in incre-
ments of 10 (percent).
Use as Slave Panel (The default is
unchecked.)
Check this box if the NV9606 is to be used as an extension to an
NV9607. When you do check this box, a drop-down menu appears
in which you can select the NV9607 to which this NV9606 will be an
extension. If there are no entries in the drop-down menu, you can-
not use the NV9606 as an extension.
Note
During configuration, certain button fields contain a colon (:) and number after the
data in the field. The number is the record ID of the object in the NV9000 configuration
database. The record IDs can be ignored but might be of some use when the config-
urer is searching for items in the configuration database.