Grass Valley NV9642 v.1.2 - Manual (Page 87)

77
NV9642
User’s Guide
Environmental Specifications
NV9642 Environmental Specifications
Defaults
Initial Panel State
Multi-destination mode or X-Y mode, selectable.
Destination: the configured default.
Buttons: high-tally is maximum brightness; low-tally is low brightness.
Configuration Page
The initial button page for a new NV9642 configuration is empty.
The default panel options are:
Panel mode: Multi-destination.
Release mode: Normal.
Default destination: None.
Preset Monitor: None
Status Monitor: None
XY Data Routing: Automatic.
MD Data Routing: Automatic.
Default name set: System names
Multidest Device Limit: 8. (This is the lowest value. The upper limit is 512.)
Src/Dst Immediate Take Enabled (checkbox checked).
All other options: Disabled (check boxes clear).
The tally inputs and outputs are all initially undefined.
DHCP
The panel is set up to respond to DHCP from the factory. It is possible to assign the panel a fixed
IP address using the Panel IP Configuration Utility.
Drawings
The drawings on the following pages identify features and provide overall and critical
dimensions.
Specification Detail
Operating temperature 0–40 °C, ambient.
Relative humidity 0 to 90%, non-condensing.
Cooling No fan required.