Grass Valley NV9642 v.1.2 - Manual (Page 31)

21
NV9642
User’s Guide
Checkbox Options
The checkbox options section is just below the panel options section, enclosed in the same
region:
A check in the box enables the option. Clearing the checkbox disables the option.
By default, all the check box options are clear except ‘Src/Dst Immediate Take’. That particular
option is enabled by default.
The ‘Clear Configuration’ button removes all configuration data from the panel. The panel then
has a blank configuration. If you click this button by mistake, you can regain the previously
saved configuration by clicking the ‘Revert to Saved’ button.
The following items are the checkbox options:
• User-programmable ID.
Allows the Panel ID to be changed locally at the control panel (in menu mode).
• User MD Definable.
This option allows the operator to select, at any time, a different destination for an MD desti-
nation.
• Save preset default.
Makes ‘Save Preset’ mode active when the panel reverts to its default state (after a Default
State button is pressed, or when the panel is restarted).
 A ‘Save Preset’ button is needed only when you want the operator to be able to view or
change the mode.
• Hold preset default.
Makes “hold” mode active when the panel reverts to its default state (after a Default State
button is pressed, or when the panel is restarted).
 Note: a ‘Hold’ button is needed only when you want the operator to be able to view or
change hold mode.
• Enable destination lock.
Check ‘Enable Destination Lock’ so that any ‘Destination Lock’ button on the panel will func-
tion.