Grass Valley NV9642 v.1.2 - Manual (Page 77)

67
NV9642
User’s Guide
Each time you press the button, the panel illuminates all its LCD buttons in a single color,
changing the color each time you press the button. Keep pressing the button until all 7 col-
ors (high and low tally) have been displayed and ‘Button Number’ appears on the display.
Press any button. The button will flash and the button number will appear on the display.
You may continue to test different buttons.
When you are finished using the setup menu, press ‘Exit’ one or more times to return the panel
to its normal pre-connected state.
When you connect the panel to its network, the panel leaves its setup state and begins to
initialize in its normal operational state. After a short time, the panel will have initialized to its
configured state and will display its default button page.