Grass Valley Kaleido-RCP2 Dec 16 2014 - Manual (Page 17)

7
Kaleido-RCP2
Guide to Installation and Operation
only. In the example described below, the three rooms that are available, are listed in this
sequence: RMA, RMB, RMC. We will select room RMC.
Enabling or Disabling DHCP
The following table shows how to enable or disable the automatic allocation of an IP
address from a server. This option is commonly called DHCP (the protocol that is used for
Action LCD indication Other buttons
Press and hold the ENTER button
until the ESC button lights up to
access the Configuration menu. Configuration
ROOM SELECTION Digit keys 2 (UP) and 8
(DOWN), and the
ENTER and ESC
buttons are lit; other
digit keys are dimmed.
Press ENTER again to obtain the list
of rooms from all Kaleido systems
currently available on the network. For some time until the list is
received:
Acquiring room list...
Once the room list is received:
ROOM Select
RMA
Press the 8 key twice, until the room
you wish to select (i.e. RMC) appears
on the display. (Press 2 to scroll in
the opposite direction.) ROOM Select
RMC
Once the display shows the desired
room name, you can:
• press ENTER to select this room
• press ESC to cancel the selection
and return to the previous menu
level in the menu.
Configuration
ROOM SELECTION Digit keys 2 (UP) and 8
(DOWN), and the
ENTER and ESC
buttons are lit; other
digit keys are dimmed.
Press ESC to exit the Configuration
menu. RMC All buttons are
dimmed.