Grass Valley Kaleido-RCP2 Dec 16 2014 - Manual (Page 16)

6
Kaleido-RCP2
Selecting a Room
display. To access the menu press and hold the ENTER button until the ESC button lights up,
and then use the keys to navigate, as indicated below:
Kaleido-RCP2 Configuration menu summary
Selecting a Room
Use the Configuration menu to select the room you wish to access with your Kaleido-
RCP2—the ON AIR room, for example. Once you select the room, you can log on as a
specific user, corresponding to one of the login positions that are available for this room
2 Move UP
8 Move DOWN
ENTER Access the submenu, or select the displayed value
ESC Go back to the previous menu level, or cancel a value selection
Note: These keys are lit when menu access is enabled.
Display the firmware version
Display the current IP address
Display the current subnet mask
Display the current gateway address