beautypg.com

Local control panel menu structure – Grass Valley Kaleido-MX (3RU) v.7.80 User Manual

Page 41

background image

27

Kaleido-MX (3RU)

Hardware Description & Installation Manual

the card. The local control panel displays a menu that can be navigated using the four
buttons located next to the display. The functionality of the buttons is as follows:

If no controls are operated for 30 seconds, the controller reverts to its normal standby
status, and the selected card’s Status LED reverts to its normal operating mode. If a
parameter was changed on the card but not submitted (SEL was not pressed) and the
30 second timeout occurs, the parameters will be confirmed as if the SEL button had been
pressed.

Local Control Panel Menu Structure

Where applicable, default values are underlined.

* All output cards within a Kaleido-MX frame must have their output heads configured with the same refresh
rate. If your frame is referenced, then the heads’ refresh rate must also match the reference signal's refresh
rate.

[+] and [-] Used for menu navigation and value modification.

SEL

Gives access to the next menu level. When a parameter value is shown, pressing this
button once enables modification of the value using the [+] and [-] buttons;
pressing a second time confirms the new value.

ESC

Cancels the effect of parameter value changes that have not been confirmed;
pressing ESC causes the parameter to revert to its former value.
Pressing ESC moves the user back up to the previous menu level. At the main menu,
ESC does not exit the menu system. To exit, press the Select button on the front
edge of the card being controlled.

Kaleido-MX output card local menu

STATUS

{CARD STATUS}**

{CARD VERSION}**

RESOLUTION

HEAD1

{List of resolutions;* = current}**

HEAD2

{List of resolutions;* = current}**

{LINK STATE}**

FANS

{CPU FAN STATUS}**

{FPGA FAN STATUS}**

NETWORK SETTINGS

FRAME IP ADDRESS EDIT ###.###.###.###

NETMASK EDIT

###.###.###.###

DEFAULT GW EDIT

###.###.###.###

LINK MODE EDIT

Auto-negotiate

100Mbps half-duplex

100Mbps full-duplex

OUTPUT A IP EDIT

###.###.###.###

OUTPUT B IP EDIT

###.###.###.###

{POSITION}**

{MAC ADDRESS}**