Reference modules, Gpi i/o modules, Reference modules gpi i/o modules – Grass Valley Kaleido-MX (3RU) v.7.80 User Manual
Page 30
16
Installation
Reference Modules
Reference Modules
The REFERENCE area of the Kaleido-MX (3RU) rear panel exposes one
connector associated with the VDA-1002 card (slot 9), and four
connectors associated with an optional REF-1801 card (slot 10, if present).
GPI I/O Modules
A GPI-1501 module supports 20 GPI inputs, and 8 configurable GPI
input/output terminals. The pinout of the associated DB-44 connectors
(labelled GPI-I/O SLOT 1, and GPI-I/O SLOT 2), is as follows:
Connector label Connector type Function
REF IN 1
DIN 1.0/2.3
Reference signal to be distributed to all
input cards in the frame.
REF IN 2
DIN 1.0/2.3
Reference signal for redundancy.
LTC IN
DIN 1.0/2.3
Time code input. To use this LTC input,
you must first configure the REF-1801
card’s time code source and processing
options. Refer to the REF-1801 Guide to
Installation and Operation (available on
the Kaleido-X DVD that shipped with
your system, and from the
Documentation Library section of Grass
Valley’s website), for more information.
SYNC OUT 1,
SYNC OUT 2
DIN 1.0/2.3
Programmable sync outputs. Require the
REF-1801 card’s SPG option (refer to the
REF-1801 Guide to Installation and
Operation).
Pin Signal
Pin Signal
Pin Signal
Pin Signal
1
GPIO-1 +
12
GPI-I 7
23
RS422-TX +
34
GPIO-5 –
2
GPIO-3 –
13
GPI-I 4
24
GPI-I 19
35
GND
3
GPIO-4 +
14
GPI-I 1
25
GPI-I 17
36
GPIO-7 +
4
GPIO-6 –
15
GND
26
GPI-I 13
37
RS422-RX –
5
GPIO-7 –
16
GPIO-1 –
27
GPI-I 11
38
GPI-I 20 / LTC
6
GPIO-8 +
17
GPIO-2 +
28
GPI-I 8
39
GPI-I 16
7
RS422-TX –
18
GPIO-4 –
29
GPI-I 5
40
GPI-I 14
8
GPI-I 18
19
GPIO-5 +
30
GPI-I 2
41
GND
9
GPI-I 15
20
GPIO-6 +
31
GND
42
GPI-I 9
10
GPI-I 12
21
GPIO-8 –
32
GPIO-2 –
43
GPI-I 6
11
GPI-I 10
22
RS422-RX +
33
GPIO-3 +
44
GPI-I 3