Grass Valley Kaleido-IP v.6.02 - Manual (Page 9)

Setting Up the Kaleido-IP Multi-Viewer
This chapter will guide you through the installation of a Kaleido-IP system in its default
configuration.
Summary
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Step 1: Physical Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Step 2: Networking Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step 3: XEdit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Step 4: System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Step 5: Testing the Monitor Wall Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Overview
A Kaleido-IP multi-viewer system in its default configuration includes a predefined room and some
layouts. Once you have connected your Kaleido-IP to your local management and data networks, hooked
up one or two 1920 × 1080 @ 60 Hz (HDTV) displays, and specified transport stream information, you can
start using these layouts to monitor television signals distributed over IP. Consult the Kaleido-X User’s
Manual (on the DVD that shipped with your system) for instructions on how to define more rooms and
layouts to suit your specific requirements.