Grass Valley Kaleido-IP v.6.02 - Manual (Page 7)

Kaleido-IP
Quick Start Guide
3
• Keyboard, mouse for basic Kaleido-IP configuration
• One dedicated 1000Base-T (or 100Base-T) Ethernet switch with enough ports for your Kaleido-IP units,
client PCs, and Kaleido-RCP2 devices
• Up to three more dedicated 1000Base-T (or 100Base-T) Ethernet switch for your Kaleido-IP units to
connect to high-bitrate data streams (one more for a Kaleido-IP-2, up to three more for a Kaleido-IP-4)
• Client PC (see below for system requirements)
• Cables (to connect your multi-viewers to displays, and to the networks):
System Requirements for a Client PC
A client PC running Windows XP (or Windows 7) is required to access the XAdmin Web client, as well as to
run the XEdit application.
Cable type Purpose
CAT-5 For Ethernet connectivity (management network, data/video
networks)
Display cables Extension modules—for example Miranda’s DXF-200
(part number DXF-200-C)—or standard DVI, HDMI, or
DisplayPort cables.
Note: In the case of Kaleido-IP multi-viewers, the current version of the Kaleido-X Software only
supports a display resolution of 1920 × 1080 @ 60Hz (HDTV).
Recommended 2 GB of RAM
Pentium 4 at 2 GHz
Hard Disk At least 125 MB free