Grass Valley Kaleido-IP v.6.02 - Manual (Page 12)

8
Setting Up the Kaleido-IP Multi-Viewer
Networking Setup 2
To change the Kaleido-IP’s management and data IP addresses:
1. Configure your client PC or laptop with an IP address in the same range as the current management IP
address of the multi-viewer (see “Configuring a Client PC” on page 12).
2. Open a Web browser window and type the multi-viewer’s management IP address in the address bar.
3. The Kaleido-X home page appears.
Kaleido-IP-4 Kaleido-IP-2
Management IP address (LAN1) 10.0.3.70 10.0.3.70
Network mask 255.255.0.0 255.255.0.0
Default gateway 10.0.0.1 10.0.0.1
Link mode Auto-negotiate Auto-negotiate
Data IP address 1 (LAN2) 172.30.3.70 172.30.3.70
Network mask 255.255.0.0 255.255.0.0
Link mode Auto-negotiate Auto-negotiate
Data IP address 2 (LAN3) 172.30.3.71 —
Network mask 255.255.0.0
Link mode Auto-negotiate
Data IP address 3 (LAN4) 172.30.3.72 —
Network mask 255.255.0.0
Link mode Auto-negotiate
Note: If the management IP address of your Kaleido-IP has been changed (i.e. it no longer corresponds
to the as-shipped configuration), it is still possible to determine the current management IP address
setting. See “Finding the Management IP Address and Application Version” on page 12.