Grass Valley K2 Lx0 RAID Storage - Manual (Page 23)

July 31, 2008 K2 Lx0 RAID Instruction Manual 23
Installing the rack mounts
To install the K2 Lx0 RAID rack mounts:
1. Remove the rack brackets from the guide brackets at both ends of the rail. Save the
rack brackets and the M3 screws, as they are used later in this procedure.
2. If your rack has 10-32 threaded holes, skip ahead to the next step in this procedure.
If your rack has 0.281-inch round holes, at both ends of the rail replace the T type
guide brackets with the H type guide brackets.
Front
channel
mount
Inner
rail
Rail
adjustment
screws
Outer
rail
Guide
Bracket
(Type T for
threaded holes,
Type H for
round holes)
Rack
Bracket
Rack
Bracket
Guide
Bracket
(Type T for
threaded holes,
Type H for
round holes)
Back
channel
mount
M3
screws
M3
screws
Front Front
channel channel
mount mount Inner Inner
rail rail
Rail Rail
adjustment adjustment
screws screws
Outer Outer
rail rail
Guide Guide
Bracket Bracket Rack Rack
Bracket Bracket
Rack Rack
Bracket Bracket
Guide Guide
Bracket Bracket
Back Back
channel channel
mount mount
Guide
Bracket
Rack
Bracket
M3
screws