Grass Valley K2 Dyno S Quick Start v.3.0 - Manual (Page 8)

Chapter 1 Installation K2 Dyno S Replay Controller
K2 Dyno S Replay System 8 Quick Start Guide
4 December 2012
K2 Dyno S Replay Controller
Find the following items in the packaging for the Dyno S Controller.
NOTE: Do not lose the Recovery Flash Drive. It contains the recovery disk image for
this specific K2 Dyno S system.
Gather additional items
To complete a typical K2 Dyno S Replay System, as referenced in this Quick Start Guide,
you must provide the following items:
• Two computer monitors (1280 x 1024 x 32 or greater) and cables. The K2 Summit 3G
Client has a VGA connector, and the Dyno S has DisplayPort connectors.
• Ethernet cables, either crossover or straight-through.
• USB keyboard and mouse, for use with Summit.
• Video monitors and cables, or if equipped with the App Center Pro license the K2
Summit 3G Client computer monitor can be used to monitor video in and out.
• Audio monitoring (headphones or speakers).
Item Description
K2 Dyno S Replay Controller
Power Cord
Recovery Flash Drive (stored on rear panel) which contains:
-Software and disk images
-Dyno S Documentation
Keyboard and Mouse
DisplayPort to DVI Adapter (passive)
Licenses and Warranties