Grass Valley K2 Dyno S Quick Start v.3.0 - Manual (Page 29)

Chapter 2 Dyno S Controller operation Shutdown Dyno S Controller
K2 Dyno S Replay System 29 Quick Start Guide
4 December 2012
Touching the Config tab, then Panel opens a screen to adjust Jog knob and
button/touchscreen brightness settings. The CALIBRATE T-BAR button at the bottom of the
screen opens a screen allowing you to adjust these settings. Tabs for other settings are
available at the top.
Shutdown Dyno S Controller
1. Touch HOME to go to the Home screen.
2. Press SHIFT to enable shifted functions.
3. Touch EXIT . The Exit screen is displayed.
1
2
3
8681_22
1
2