Grass Valley K2 Dyno S Quick Start v.3.0 - Manual (Page 16)

Chapter 2 Dyno S Controller operation View Home page status
K2 Dyno S Replay System 16 Quick Start Guide
4 December 2012
• Set C1 and C2 to Recorder and C3 and C4 to Player.
• Touch On to activate each channel.
7. Touch Start . The session begins and the Home tab screen appears on the touch screen
and external computer display,
Typically C1 and C2 are recorders and C3 and C4 are players, but these and the Loop
Record settings will vary depending on your specific operational requirements. These
settings, once chosen, are fixed for that session and cannot be changed. Create a new
session if you want to operate the system with different settings.
View Home page status
Touching the Home tab displays the Home page.
At the top of the screen the remaining storage time for this session is displayed. The
remaining storage time is available in terms of an Event Day, taking into account the
available time for all Record channels.
• When Loop Record is On , when the Server becomes filled older unmarked video and
audio material will be overwritten with new material.
• When Loop Record is Off , when the Server fills completely it will stop and all the
material will be retained. If you want a record session that will not overwrite older
material, create a session with Loop Record Off.