Grass Valley K2 Dyno S Quick Start v.3.0 - Manual (Page 17)

Chapter 2 Dyno S Controller operation Select input and playout channels
K2 Dyno S Replay System 17 Quick Start Guide
4 December 2012
Select input and playout channels
1. Select A or B to choose which input (camera angle) to assign to the currently selected
playout channel.
2. Select P1 or P2 to choose which playout channel will be controlled by the Dyno S
panel. To gang channels, press both P1 and P2 at the same time.
The Input buttons go Red when assigned to the currently selected playout channel(s), and
go Green when not being controlled by the Dyno panel.
The Playout buttons go Red when selected for control by the panel, and Green when not
selected for control.
1 2
8681_06