Grass Valley K2 Dyno Installation v.1.6 - Manual (Page 30)

4. Select a new session and Next .
5. For a typical system, do the following:
a) Set C1 and C2 to Recorder.
b) Set C3 and C4 to Player.
c) Touch
Next .
6. For a typical system, do the following:
a) Set C3 to PGM.
b) Set C4 to PVW.
c) Touch
Start .
Refer to K2 Dyno Controller User Manual and K2 Dyno Replay System Quick Start
Guide for operation instructions.
30 K2 Dyno Controller Installation Manual 13 April 2010
Installing and configuring software