Grass Valley K2 Dyno Installation v.1.6 - Manual (Page 17)

C1 C2
USB/139 4
100-240 V-
4-2A,
60-50Hz
100BT/1000B T
GPI VGA REF. LOOP THROUG H
SDI IN 1 SDI OUT 1 SDI OUT2 LTC I/O
AESAUDI O RS422
SDI OUT1 SDI OUT2
AESAUDI O RS422
LTC I/O SDI IN 2 SDI IN 3 SDI IN 1 SDI IN 2 SDI IN3
Channels (C1, C2) are bi-directional
Use C1 as
record channel.
Connect SDI in Use C2 as
play channel.
Connect SDI out
Power
cord
AES
audio
Keyboard
and mouse VGA
monitor Ethernet
control
connection
Optional:
Ethernet
media
(FTP)
connection
Each channel can be both an input (record channel) and an output (play channel).
For the typical system, C1 is a record channel and C2 is a play channel.
The control connection between the K2 Summit Client and the K2 Dyno
Controller can be via direct connect cable or via an Ethernet switch. Control
connections must be on the same network (subnet).
For complete cabling instructions, refer to the K2 System Guide. If using ChannelFlex
Suite features, refer to the K2 AppCenter User Manual.
Cable ChannelFlex Suite inputs and outputs
ChannelFlex Suite features require the AppCenter Elite license. Super Slo-Mo also
requires the HD license. When the K2 Summit Production Client or K2 Solo Media
Server is licensed and configured for these features, channel connections are as follows:
13 April 2010 K2 Dyno Controller Installation Manual 17
Cabling systems