Grass Valley Jupiter Control System - Manual (Page 14)

12
Step 6
Next open the Serial Protocol table:
The devices described in the Network Description table appear here also. This table
sets up the type of devices that will be connected to the VM 3000, SI 3000, and CM
4000 ports. The factory configuration will probably contain all MPK entries. (MPK =
message per keystroke; this protocol is for all Thomson control panels.) Changes can
be made at this time, but keeping the system simple at this stage is the best advice.
Return later to add more complicated devices. Close this window by clicking OK. See
the Serial Protocol subheading under section 5 of the Jupiter manual for more details
about this table.
Step 7
Next open the Switcher Description table:
Note
Changing switcher names or level names may cause data in the Switcher Input and Output
tables to be lost.