Grass Valley iControl Solo - Manual (Page 28)

24
Installing IC-USB
Connecting the IC-USB Device to a Miranda Quartet 2 Frame
2. Plug the Type B (square) end of the USB cable into the IC-USB device.
Connecting the IC-USB Device to a Miranda Quartet 2 Frame
To connect the converter to a Miranda Quartet 2 frame:
1. Connect the IC-USB device’s DE-9 connector to the supplied RJ-45-to-DE-9 female adapter.
2. Connect one end of the supplied Ethernet cable to the RJ-45-to-DE-9 female adapter, and the other end
to one of the RJ-45 ports in the back of the Quartet 2 frame:
IC-USB connected to a Miranda Quartet 2 frame
Connecting the IC-USB Device to a Miranda Symphonie Frame
To connect the IC-USB to a Miranda Symphonie Frame:
1. Connect IC-USB, RJ-45-to-DE-9 female adapter and Ethernet cable as described under "Connecting the
IC-USB Device to a Miranda Quartet 2 Frame" , above.
2. Connect the RJ-45-to-DE-9 male adaptor to the Ethernet cable.
3. Connect the male adaptor to one of the RS-422 female DE-9 ports in the back of the Symphonie frame:
IC-USB connected to a Miranda Symphonie frame
Determining the IC-USB COM Port Number
The IC-USB COM port number is required to configure the Miranda iControl Solo Imaging Communicator
service.