Grass Valley iControl Solo - Manual (Page 17)

iControl Solo
User Guide
13
Info Control Panels
The Info control panel is available for all device types. The Info panel includes device identification
information such as a label, a short label, the device type, comments, source ID, config status, frame, and
slot. You can display the Info panel from the device control panel, or you can right-click a device in the
Navigator window and then click Show info control panel from the shortcut menu.
From the Info panel, you can change the name of the selected device and type comments. By default, the
device name takes the type identification; however, you will find it helpful to rename devices using
Audio Processing Provides audio processing and delay parameters for the embedded or discrete audio input
channels. These parameters affect both the output audio channels (embedded and AES)
and the audio channels sent to other companion cards.
Audio Output Provides extended audio processing for the 16 audio channels embedded in the HD/SD
outputs, including audio channels mixing and audio embedding mode.
Timing Provides access to timing adjustments which affect the signal outputs.
Factory/Presets Allows user and device profile management, and restoring of a device’s factory default
configuration.
Options Describes available options for the device, and provides information on how to enable or
disable them.
Alarm Config. Opens a separate window where alarm status can be monitored and configured.
Info Allows viewing and modifying information about a device (e.g. labels, source ID,
comments) to help identifying a specific device in a complex setup.
(Continued)
Tab Description