Grass Valley iControl Solo - Manual (Page 24)

20
Using iControl Solo
Adding Cards to the Reference Configuration 3
Moving Groups
To move a group:
1. In the Navigator window, right-click the group you wish to move, and then click Cut on the shortcut
menu.
2. Right-click the destination folder, and then click Paste on the shortcut menu.
The group appears as a new folder in the chosen location.
Renaming Groups
To rename a group:
1. In the Navigator window, select the group folder you wish to rename.
2. Right-click the group folder and then click Rename group.
The Folder Name window appears.
Folder Name window
3. Type a new name for the group, and then click Rename group.
The new group name appears for the chosen folder.
Removing Groups
To remove a group:
1. In the Navigator window, expand the group folder you wish to remove.
2. Remove all devices from the group folder by dragging them to another folder or to the root of the folder
structure (only empty groups can be removed).
3. Right-click the empty group folder, and then click Remove group on the shortcut menu.
4. When prompted to confirm the removal, click Yes.
The group no longer appears in the Navigator window.
Adding Cards to the Reference Configuration
The reference configuration (see page 17 ) is a way to keep track of cards or groups of cards important to
your setup.