Grass Valley iControl Solo - Manual (Page 15)

iControl Solo
User Guide
11
To access the control panel for a device, double-click the device in the Navigator window. Alternatively,
right-click the device name, and then click Show control panel on the shortcut menu.
The device name is displayed at the top of its control panel, along with a dashboard containing one or more
icons representing the status of key device parameters. Error conditions are indicated by color and by a text
message that appears below the dashboard. If more than one error condition is present, hold the pointer
over an icon to continuously display its associated error message; otherwise the display cycles through all
reported errors.
Note: Miranda cards are shipped with Installation & Operation Guides that provide detailed
descriptions of their respective control panels, along with instructions on their use.
Note: If the Control icon on the dashboard is yellow, this indicates that local card
control is active—the card is being controlled from a local hardware control panel. In
such a case, any changes made using the iControl Solo interface will have no effect on
the card.