Grass Valley FIO-1901-RR - Manual (Page 18)

GUIDE TO INSTALLATION AND OPERATION
14 | FIO-1901-RR
3.3.6 The Factory/Presets panel
Click the Load Factory button to reset all parameters on
this FIO-1901-RR card to factory default values.
• The factory default values are shown underlined in the
menu found in the Annex to this document, beginning
on page 20.
User Presets
The FIO-1901-RR has memory registers which can hold up
to 5 user-defined parameter settings.
Select any one of the five presets using the pull-down list.
The name of the currently-selected User Preset is shown on
the name bar.
Click Load to load the contents of the selected User Preset
into the FIO-1901-RR. All parameter settings and values will
be replaced by the contents of the selected User Preset.
Click Save to store the current parameter settings and
values from the FIO-1901-RR into the selected User Preset.
The existing contents of the preset will be overwritten
without asking for confirmation.
3.3.7 The Alarm Config panel
This panel allows the alarm
reporting of the FIO-1901-RR
to be configured.
Click on the Alarm Config
button to open the Alarm
Configuration window.
The Alarm Configuration
window is organized in
columns
Figure 3.8 Factory / Presets panel
Figure 3.9 Alarm Configuration panel