Grass Valley FIO-1901-RR - Manual (Page 14)

GUIDE TO INSTALLATION AND OPERATION
10 | FIO-1901-RR
3.3 Remote control using iControl
The operation of the FIO-1901-RR may be controlled using Miranda’s iControl system.
• This manual describes the control panels associated with the FIO-1901-RR and their use.
• Please consult the iControl User’s Guide for information about setting up and operating iControl.
In iControl Navigator or iControl Websites, double-click on the FIO-1901-RR icon to open the control panel.
3.3.1 The iControl graphic interface window
The basic window structure for the FIO-1901-RR is shown in figure 5.1. The window identification line gives the card
type and the slot number where the card is installed in its Densité frame.
There are three main sections in the window itself, identified in figure 3.2:
1. The top section displays icons on the left. These icons report the
status of some parameters associated with this FIO-1901-RR. Figure
3.3 shows the three icons that appear.
Move the mouse over an icon and a status message appears below the
icon providing additional information.
If there is an error, the error status message appears in the message
area without mouse-over.
• If there are multiple errors, the error messages cycle
• The icon whose status or error message is shown is highlighted
with a mauve background
Icon # 1 2 3
1
2
3
3
Figure 3.2 FIO-1901-RR iControl graphic interface window
Figure 3.3 iControl Status Icons