Grass Valley EDIUS 5 - Manual (Page 58)

EDIUS SP-SDI (SHX-E2)
PCI standard PCI Express x 1 (PCI Express Spec. Revision 1.0a)
Digital video DV terminal (DV 4pin) x 1
Analog video
Input *1
Composite (BNC) x 1
S-Video (Mini DIN 4pin) x 1
Component (BNC) x 3
Output
*1
Composite (BNC) x 1
S-Video (Mini DIN 4pin) x 1
Component (BNC) x 3
SD-SDI *2
Input SMPTE259M-C (BNC x 1)
Output SMPTE259M-C (BNC x 2)
Analog audio
Input *1
Unbalanced audio 2ch (RCA) pin x 2
Balanced audio 2ch (XLR) x2
Output
*1 Unbalanced audio 2ch (RCA) pin x 2
Balanced audio 2ch (XLR) x2
Embedded
audio *2
Input /
Output
SMPTE272M-A (4ch Input/Output is supported)
Audio monitor
*3
Output
Unbalanced audio 2ch (4pin connector x 1 for
Sound Card Input)
DVITC *2
Input Not supported
Output Superposed on SD-SDI output
Reference
Input*1
BNC x 1
REMOTE *1 RS422 (D-Sub 9pin x 1)
Board size 212mm (Width 111mm)
Max
consumption
current
+3.3V : 2.3A
+12V : 1.4A
Weight
About 310g (main board)
About 380g (main board + PCI retainer)
About 500g (main board + PCI retainer + SDI bracket)
*1 Connected from main board connector (D-Sub62 x 1) with special multi I/O cable.
*2 Connected to the main board via the SDI bracket.
*3 MonitorOut whose channel can be configured. Output is in 1.0 [Vrms] and is
exclusive for Sound Card input.
Use the expansion board to monitor Ch1/2, while using Audio Monitor to monitor
Ch3/4.