Grass Valley EDIUS 5 - Manual (Page 51)

49
So
ftw
are I
ns
tal
lat
ion / U
nin
sta
lla
tio
n
POINT For more information on how to start up EDIUS, see "Starting EDIUS"
"EDIUS User Guide / Reference Manual". •
POINT If HX-E1 (Expansion board) is mounted, follow the following steps
and check whether the driver is installed properly.
Referring to steps 1 and 2, open [Device Manager].
Double click the following items to check that the driver is installed.
- [IEEE 1394 Bus host controllers]
Device-[NEC OHCI Compliant IEEE 1394 Host Controller]
- [Network adapters]
Driver-[1394 Net Adapter]
* #2 of or [1394 Net Adapter #2] may appear when connecting and
disconnecting boards several time. Display description varies
depending on your environment.
Close [Device Manager].
1
2
3
When resources compete
EDIUS will not operate normally if your and other devices compete or share PC
resources. Try following solution.
Remove other device that share interrupting or change IRQ of other device.
Change resource setting with BIOS of PC or motherboard. See instruction manual of
PC or motherboard since BIOS setting method varies by manufacturer.
POINT IRQ set method varies depending on PC or motherboard manufacturer.
Some types assign arbitrary IRQ to each PCI Express slot with BIOS,
other types program special IRQ in advance. •
•
•