Grass Valley EDIUS 5 - Manual (Page 17)

15
H
ard
w
are S
ett
in
g
Audio output
Specification of audio cable (4pin-4pin) is:
Red : Right channel (R)
White : Left channel (L)
Black : Ground (G)
Audio cable (4pin-4pin)
For audio output, use the attached audio cable (4pin-4pin) to connect sound device in
output destination and the main board.
* Attached audio cable (4pin-4pin) branches off connectors with different type and
wiring specification. Connect the side without branch to main board, and the side
with branch to sound device in output destination. Use a connector that complies with
the connector type and wiring specification for connecting destination. If you cannot
use the attached audio cable (4pin-4pin), prepare another cable separately.
Output from sound device on board
Connect the audio cable to the terminal of motherboard.
* Note that onboard sound device (sound device installed in motherboard: for details,
see the instruction manual for your PC or motherboard) might interfere with the
board installed in slot depending on connector position of the device.
Output from sound board
Connect the audio cable to the terminal of sound board.