Grass Valley Cobalt v.2.87 - Manual (Page 59)

Cobalt User Manual- document version: 2.87 – Page 59
Example JIP enabled in IP Manager.
22.1.2 Defining a JIP Channel in TX/MAM
 Create a main and backup JIP Channel as described in the TX/MAM User Manual.
 To enable JIP, following settings on the Info tab must be specified:

Is Simulcast: select when using JIP in a simulcast configuration

Disable scenegraph preload: used for JIP, enable for JIP-channel

Join In Progress – JIP with: select the Channel to JIP with; this should be the
primary
Channel (broadcast set 0).

Broadcast set: select the appropriate broadcast set:
Channel Broadcast set
JIP 5:broadcast4