Grass Valley Cobalt v.2.87 - Manual (Page 44)

Cobalt User Manual- document version: 2.87 – Page 44
17.
Filtering the Playlist (view)
You can filter the Playlist (view) based on:

status

main event name

Event ID

Asset ID

format

flag

over run and under run

main event type
To apply a Filter:
 Click the Filter button.
The last used filter is applied.
 Click the arrow next to the Filter button > to select a filter if filters have been saved.
 To stop filtering, click the Filter button again.
To define a filter:
 Click the arrow next to the Filter button > Adjust filter.
 Select the filter options you want to use.
 Click Save and specify a Name to save the filter.
 In the filter options window, click Apply to directly apply the filter, or Cancel if you do not want to
apply the filter.
To modify a filter:
 Select the filter you want to modify.
 Click the arrow next to the Filter button > Adjust filter.
 Edit the filter options.
 Click Save.
 Select the filter you want to save or specify a new Name.
 Click Save > OK.
 In the filter options window, click Apply to directly apply the filter, or Cancel if you do not want to
apply the filter.