Grass Valley 3-CCD ANALOG CameraMan Rev.B - Manual (Page 27)

Page 24 CameraMan ® 3-CCD Camera System Installation and Operations Manual
Appendix H: The 18x Lens Shroud
The 18x verson of the 3-CCD CameraMan camera comes equipped with a rectangular lens shroud. The shroud helps to keep out
glares from light sources located on the sides of the camera.
Installing the Shroud
1. Locate the red dots on the top and bottom
of the shroud, and on the lens itself.
2. Align the red dot on the shroud with the
dot on the lens, then slide the shroud over
the lens.
3. Tighten the shroud in place using the bolt
attached to the shroud.
lens shroud
tightening screw
red alignment dots
camera lens