Grass Valley ADX-1901 - Manual (Page 14)

GUIDE TO INSTALLATION AND OPERATION
10 | ADX-1901
[+] [–] Used for menu navigation and value modification
[SELECT] Gives access to the next menu level. When a parameter value is shown, pushing this button once
enables modification of the value using the [+] and [–] buttons; a second push confirms the new value.
[ESC]
Cancels the effect of parameter value changes that have not been confirmed; pushing [ESC] causes the
parameter to revert to its former value.
Pushing [ESC] moves the user back up to the previous menu level. At the main menu, [ESC] does not
exit the menu system. To exit, re-push the [SELECT] button for the card being controlled.
If no controls are operated for 30 seconds, the controller reverts to its normal standby status, and the selected card’s
STATUS LED reverts to its normal operating mode.
4.2 Menu for local control
The ADX-1901 has operating parameters which may be adjusted locally at the controller card interface.
• Press the SELECT button on the ADX-1901 front card edge to assign the Densité frame’s local control panel
to the ADX-1901
• Use the keys on the local control panel to step through the displayed menu to configure and adjust the ADX-
1901.
The complete menu structure is shown in
ANNEX 1 to this document, beginning on page 41.