Grass Valley ADVC-3000 - Manual (Page 64)

Chapter 3 - Appendix
64
1 Specifi cations
Video signal
Composite
S Video NTSC (525/59.94i), PAL (625/50i)
* SECAM is available only for input. In that case, PAL signal is
output.
Component
SD-SDI/DV
525/59.94i, 625/50i
* 59.94i
 50i conversion is not possible.
DV input/output
IEEE1394 4 pin x 1, IEEE1394 6 pin x 1(Without bus power
supply)
* Incompatible with DV stream of DVCPRO standard.
Option/update is necessary to make DV standard stream output
to DVCPRO VCR.
Video input
SD-SDI BNC x 2 (SD-SDI IN + ACTIVE THROUGH, SMPTE 259M-C)
Component BNC (Component x 1, Y/Pb/Pr)
Y/C S teminal x 1
Composite BNC x 1 (Composite)
Video output
SD-SDI BNC x 2 (SMPTE 259M-C)
Component BNC (Component x 1, Y/Pb/Pr)
Y/C S teminal x 1
Composite BNC x 1 (Composite)
Audio input
SD-SDI Embedded audio (SMPTE 272M-A)
AES/EBU
BNC x 2 (CH1 to CH4)
32/44.1/48kHz, 16/20/24bit, Unlocked/Locked
Can be converted anytime to 48kHz. Locked by built-in SRC
Balanced
XLR-3-31 x 4 (CH1 to CH4)
*600
 termination or high impedance is selectable.
Unbalanced Pin jack (stereo 1 line, CH1 and CH2)
DV
32/44.1/48kHz (Unlocked/Locked) 16bit, 2ch
32kHz (Unlocked/Locked) 12bit, 4ch
Audio output
SD-SDI Embedded audio (SMPTE 272M-A)
AES/EBU BNC x 2 (CH1 to CH4)
Balanced XLR-3-32 x 4 (CH1 to CH4)
Unbalanced Pin jack (stereo 1 line, CH1 and CH2)
DV
48kHz/Locked/16bit/2ch
32kHz/Locked/12bit/4ch
Monitor output Pin jack (stereo 1 line, mapping CH1 to CH4 on L/R is possible)
TC input/output
LTC input BNC x 1
LTC output BNC x 1
DVITC input
Separated from SD-SDI input
*Incompatible with VITC from analog video input
DVITC output
Repeatedly overlaps with SD-SDI output
* Line select function is available.
* Also overlaps with analog video.
66