Grass Valley ADVC-3000 - Manual (Page 17)

Chapter 2 - Basic Operations
17
REF IN
Input connectors for receiving a reference signal
(sync signal).The LED lights red when reference
signal is detected and external sync setting is REF IN.
The REF connector has through output. If a cable is
not connected to the output connector, it has a 75
j
automatic terminaltion.
TC
Time code input
and output
connectors.
REMOTE A/B
Remote control connector.
Select “REMOTE A” or
“REMOTE B” from the
menu.
AC IN
Connect the provided
power cord and then fix it
with the provided power
cord clamp (refer to
page10).
DIP switch
DV1 (6-pin)
Use a DV cable to connect the
ADVC3000 to a DV device or a PC.
(Bus power is not supplied.)
DV2 (4-pin)
Use a DV cable to connect the
ADVC3000 to a DV device or a
PC.
REF OUT
Output connector for reference
signal (sync signal).
Earth terminal
Connect an earth
wire to this terminal,
if necessary. Refer to page 18 for
details.
DIGITAL AUDIO OUT
Digital audio output connectors.
DIGITAL AUDIO IN
Digital audio input connectors.
NOTES
- This unit will not work as an OHCI Hub with Canopus DV products.
- To use this unit as a Hub with OHCI devices, the application also needs to support two or more
devices.
19