Grass Valley ADVC-3000 - Manual (Page 55)

Chapter 2 - Basic Operations
55
404 ext. sync source
External synchronization
source settings
LCD display
Synchronizes to sync signal contained in video signal input from the
input connector selected by the VIDEO IN button.
Synchronizes to signal input into REF IN connector.
(Factory default)
Sets the source used as the sync signal when
performing external synchronization in DV SDI/
ANALOG mode.
501 9P remote
9-pin remote control setting
LCD display
Disables the deck control from the remote connector.
Enables the deck control from the remote A connector.
Enables/Disables the deck control from the 9-pin
remote controller.
57
403 audio out delay
Audio out delay setting
LCD display
Set specifi ed numerical value between -100 and 100 msec.
(Factory default: 0 msec)
Sets the amount (in unit of milliseconds) to increase/
decrease the ADVC3000 audio output delay relative to
the video output, when the external sync is enabled in
DV SDI/ANALOG mode.
(Continued on the next page)