Grass Valley ADVC-3000 User Manual
Page 23
Chapter 2 - Basic Operations
23
3. Audio format
48 k .............................DV audio signal of 48kHz, 16bit audio is input.
44 k .............................DV audio signal of 44.1kHz, 16bit audio is input.
32 k .............................DV audio signal of 32kHz, 16bit or 12bit audio is input.
----- ..............................No signal is detected.
4. Deck status
If blank ........................9-pin remote control is not in use.
NoDev .........................Can’t fi nd deck. Check cable connection.
PLAY ...........................Deck is playing.
PLAY* ..........................Deck is playing. (SERVO LOCK)
REC ............................Deck is recording.
REC* ...........................Deck is recording. (SERVO LOCK)
F.FWD .........................Deck is fast-forwarding.
REW ...........................Deck is rewinding.
STOP ..........................Deck is stopped.
PAUSE ........................Deck is shuttling. (Paused)
SHUTL ........................Deck is shuttling.
EJECT ........................No tape in deck.
5. On the Main screen 1: Input time code
TC 00:00:03:22 ...........For PAL/NTSC NDF (Non Drop Frame)
* A colon is used between seconds and frames as a delimiter.
TC 00:00:03;22 ...........For NTSC DF (Drop Frame)
* A semicolon is used between seconds and frames as a delimiter.
TC --:--:--:-- .................No DV signal is detected.
* Free-run time code is used during built-in color bar output or when time code is not
input.
On the Main screen 2: Users bit
UB 00 00 00 00 ...........The letters or numbers designated by the user are displayed.
UB -- -- -- -- .................No DV signal is output.
6. Audio monitor status
----- ..............................The channel is not monitored.
7. 9-pin remote system
A .................................REMOTE A is selected.
B .................................REMOTE B is selected.
If blank ........................The remote connectors are disabled.
25