Grass Valley ADVC-3000 - Manual (Page 54)

Chapter 2 - Basic Operations
54
402 ext. sync conf.
External synchronization
confi guration
LCD display
Set specifi ed numerical value between -1024 and 1023.
(Factory default: 0)
Sets the amount (in unit of 37 nanoseconds) to
increase/decrease the ADVC3000 video output delay
(system phase) relative to the external sync input in
DV SDI/ANALOG
mode.
56
401 ext. sync
External synchronization
LCD display
Disables the external sync operation.
(Factory default)
Enables the external sync operation.
Enables the external sync operation as “perfect sync mode”.
* The “advanced” setting is only available when DV signal is output from an IEEE1394 connector compliant with PC
OHCI specifi cations. For supported PC operating systems, please refer to our website.
* When the ADVC3000 is connected to Canopus ADVC units through DV connectors, do not set to the “perfect sync
mode”.
Enables/Disables the external sync operation in DV
SDI/ANALOG mode.