Grass Valley ADVC-3000 User Manual

Page 24

Chapter 2 - Basic Operations

Main Screen 3

This screen shows the information on the current settings.

2.External synchronization enabled/disabled

Displays the current setting of the external synchronization.

3. 9-pin remote
enabled/disabled

Displays the current
setting of the 9-pin
remote.

1. Video standard

Displays the current video standard.

5. Video output
reference

Displays the reference
signal with which the
SDI/ANALOG video
output is synchronized.

4. Time code select

Displays time code selected in the
SDI/ANALOG

DV mode.

1.Video standard

NTSC ..........................ADVC3000 operates in NTSC mode.
PAL .............................ADVC3000 operates in PAL mode.
SECAM .......................ADVC3000 operates in SECAM mode.

2. External synchronization enabled/disabled

disable ........................External synchronization function is disabled.
enable .........................External synchronization function is enabled.
advanced ....................External synchronization function in the “perfect sync mode” is enabled.

NOTES

“advanced” setting is effective only when DV signal is output from the PC’s IEEE1394 board,
1394OHCI standard and “

” is displayed.

3. 9-pin remote enabled/disabled

disable ........................9-pin remote control function is disabled.
enable[A] .....................Remote control connector A is selected.
enable[B] .....................Remote control connector B is selected.

4. Time code select

DVITC .........................ADVC3000 is acquiring the time code from DVITC of the SDI input connector.
LTC .............................ADVC3000 is acquiring the time code from TC input connector.
auto .............................ADVC3000 tries to acquire the time code from both DVITC of the SDI input connector

and LTC and uses LTC if it is acquired and DVITC if LTC is not detected.

5. Video output reference

REF .............................ADVC3000 is outputting the signal in synchronization with the REF signal

input from the REF IN connector.

Vin ...............................ADVC3000 is outputting the signal in synchronization with the video

signal selected by the VIDEO IN button.

DVin ............................ADVC3000 is outputting the signal in synchronization with the DV-

decoded video signal (only in DV SDI/ANALOG mode).

INT ..............................ADVC3000 is outputting the internal SG signal (only in SG mode).