Grass Valley ADC-1722 - Manual (Page 10)

GUIDE TO INSTALLATION AND OPERATION
10/22 | ADC-1722
• Press the SELECT button on the ADC-1722 front card edge to assign the Densité frame’s local
control panel to the ADC-1722
• Use the keys on the local control panel to step through the displayed menu to configure and adjust
the ADC-1722.
FPGA FAILURE, REAR PANEL ERROR, INTERNAL, EXTERNAL, FRAME, CARD EDGE
0 dBFS SETTING 0, 1, 2, ..., 24
CONFIGURE ALARM NO EXTERNAL
REF
ALARM LEVEL
ALARM REPORT NONE, GPI
GREEN, YELLOW, RED, FLASH RED
OVERLOAD
ALARM LEVEL
ALARM REPORT NONE, GPI
GREEN, YELLOW, RED, FLASH RED
NO SIGNAL
ALARM LEVEL
ALARM REPORT NONE, GPI
GREEN, YELLOW, RED, FLASH RED
TONE
ALARM LEVEL
ALARM REPORT NONE, GPI
GREEN, YELLOW, RED, FLASH RED
MUTE
ALARM LEVEL
ALARM REPORT NONE, GPI
GREEN, YELLOW, RED, FLASH RED
ALARM LEVEL
ALARM REPORT NONE, GPI
GREEN, YELLOW, RED, FLASH RED
NO FRAME REF
TONE CHANNEL 1&2
CHANNEL 1 OFF, EBU
CHANNEL 2
LEVEL CHANNEL 1&2
CHANNEL 1
LEFT & RIGHT
LEFT -96, ..., 0, …, +12
RIGHT CHANNEL 2
MUTE CHANNEL 1&2
CHANNEL 1
LEFT & RIGHT
LEFT OFF, ON
RIGHT CHANNEL 2
OUTPUT SAMPLE RATE 32k, 48k, 96k
NO SIGNAL DELAY 0, ..., 15, ..., 255
SIGNAL THRESHOLD -48, -42, -36, -30, -24
MONITORING INPUT 1 L&R, INPUT 2 L&R,
OUTPUT 1 L&R, OUTPUT 2 L&R
STATUS
CHANNEL 1
CHANNEL 2
UC=Vxxx, FPGA=Vxxx
MODULE
OVERLOAD (L,R,L&R), MUTE(L,R,L&R), TONE, NO SIGNAL(L,R,L&R), ALL OK
(dB)
(dBu)
OUTPUT WORD LENGTH CHANNEL 1&2
CHANNEL 1 16, 18, 20, 24
CHANNEL 2
(bits)
CHANNEL STATUS CHANNEL 1&2
CHANNEL 1
ORIGIN
DESTINATION
4 ASCII characters
CHANNEL 2
(s)
(dBu)
RESTORE Vxxx
FIRMWARE VERSION
FACTORY DEFAULT