beautypg.com

Introduction, Module features – Grass Valley 8935CF User Manual

Page 9

background image

8935CF — Instruction Manual

9

8935CF 4 Channel Electrical to
Fiber Converter Module

Introduction

This manual covers installation, configuration, and operation of the 8935CF
4 Channel Electrical to Fiber Converter module.

Module Features

The 8935CF module is a four channel electrical to optical converter (dual
transmitter) with both electrical and fiber optic outputs. The module can
accommodate a variety of high definition video inputs as well as DVB/ASI,
AES, and GVG audio TDM interfaces.

The following features are available with this module:

Two module set including a hot-swappable front and rear module and
up to two single mode SFP dual transmitter fiber optic submodules
mounted on the front module.

Up to ten 8935CF modules in the same 2 RU GeckoFlex frame.

Four electrical BNC inputs to up to four fiber optic outputs and an iden-
tical electrical BNC output for each channel.

Re-clocking for stable long distance signals or re-clocking bypass for
non-SDI signals.

Supports both HD or SD formats and passes embedded audio present
in the incoming video stream.

CWDM (Coarse Wavelength Division Multiplexing) capability when
combined with 8939FCA Passive CWDM Optical Mux/Demux
modules and 8935FC 4 Channel Fiber to Electrical Converter modules
and other fiber-ready modules.

SNMP and product health monitoring is supported through the
8900NET module with applications such as NetCentral.

Software updating using the NetConfig Networking application.

This manual is related to the following products: