Grass Valley 8935CF - Manual (Page 26)

26 8935CF — Instruction Manual
Configuration and Monitoring
Top Edge LEDs
The LEDs and onboard controls on the top front edge of the circuit board
are shown in
Figure 17 . LED color and conditions are described in Table 1
on page 27 . Mode configuration using the front edge controls is described
in Local Mode Configuration on page 31 .
Figure 17. Top Edge LEDs and Controls
8543_06
F
A
UL
T
COMM
REM O
V
R
SFP1 SFP2
CONFIG
PO
WER
The bi-color (red or yellow)
SFP1 and SFP2 LEDs
have four states: All Off,
Red on,
Red blinking,
or Yellow on.