Grass Valley 8935CF - Manual (Page 29)

8935CF — Instruction Manual 29
Configuration and Monitoring
Table 2. Bottom Edge LED Names and Meaning
LED Indication Condition
BYP (CH1-4)
(yellow)
Off Channel is not in bypass mode.
On continuously Channel is in bypass mode.
HD (CH1-4)
(yellow)
Off
High Definition (HD) is not supported in the currently selected operating mode or HD is supported in current
mode but input is not 1.5 Gb/s.
On continuously HD is supported in the current mode, the input is 1.5Gb/s, and is locked.
SD (CH1-4)
(yellow)
Off
Standard definition (SD) is not supported in the currently selected operating mode or SD is supported in current
mode but input is not 270Mb/s.
On continuously SD is supported in the current mode, the input is 270Mb/s, and is locked.
PRES (CH1-4)
(green)
Off No input or the incorrect input standard is present in the current operating mode.
On continuously The correct input standard is present. in the current operating mode.
Flashing
Input is indeterminate. In AUTO/BYP or FIXED/BYP mode, if the input signal is less than 19 Mb/s (such as AES),
the carrier detect circuit will not detect an input signal.
AUTO/MUTE
(yellow)
Off AUTO/MUTE is not the current operating mode selected.
On continuously AUTO/MUTE is the current operating mode selected.
270M/MUTE
(yellow)
Off 270M/MUTE is not the current operating mode selected.
On continuously 270M/MUTE is the current operating mode selected.
1.5G/MUTE
(yellow)
Off 1.5G/MUTE is not the current operating mode selected.
On continuously 1.5G/MUTE is the current operating mode selected.
AUTO/BYP
(yellow)
Off AUTO/BYP is not the current operating mode selected.
On continuously AUTO/BYP is the current operating mode selected.
FIXED/BYP
(yellow)
Off FIXED/BYP is not the current operating mode selected.
On continuously FIXED/BYP is the current operating mode selected.