Grass Valley 8900GEN-SM - Manual (Page 40)

40 8900GEN-SM — Instruction Manual
8900GEN-SM Applications
5. Set the following parameters on the Genlock web page under Genlock
Control:
• Genlock – Enabled
• Input Selection Standard – set the pulldown frame rate to NTSC .
• Loop Bandwidth – Fast Lock
6. Under Genlock Bus Timing, set all the timing controls (Line Offset,
Coarse Offset (37ns), and Fine Offset) to 0 (zero).
7. Set the Drive Frame Reference Bus to Auto .
8. On the Genlock web page, verify that the header reports the Status as
Locked and the Output Bus as Ref 1 .